Are these settings right for accessing my network from a NAT'd dynamic IP connection?
Remote IPSec Gateway Address 0.0.0.0
Tunnel access from local IP address: Subnet
IP Address for VPN (local): 192.168.2.1
IP Subnet Mask (local): 255.255.0.0
Tunnel ACcess from remote IP address Single address
IP Address for VPN (remote): 192.168.2.2
IP Subnet mask (remote): N/A
Protocol: ESP
Key Exchange Method: Auto
Authentication Method: Pre-Shared Key
Pre-Shared Key: XXXXX
Local/Remote ID Type: IP/IP
Local/Remote ID Content: 192.168.2.1/192.168.2.2
My network is in the 192.168.1.x range with a 255.255.255.0 subnet.
I have a Zyxel P660HN-51, with a desktop (192.168.1.2), xbox (192.168.1.2), and a printer (192.168.1.3). The Zyxel is 192.168.1.1.
