Login

Forgot password?

We love free and open web!

Author Topic: Cannot establish multiple simultaneous PPTP connections with the CISCO 1841  (Read 27496 times)

Offline shehan31

  • Newbie
  • *
  • Posts: 1
    • View Profile
I have recently tested a PPTP connection with a CISCO 1841 router and got success. I have configured a windows 7 client and successfully connected to the router and was able to access the documents in the server PC that I have mentioned in the attached diagram. I have created number of different users  in the CISCO 1841 too. While some one is having a connection, another user cannot connect to it, which means multiple simultaneous connections aren't possible. Do I have to create a ACL for the PPTP and if yes, How ?

---------------------------------------------------------------------------------

 FastEthernet0/0 is up, line protocol is up
  Internet address is 192.168.100.1/25
  Broadcast address is 255.255.255.255
  Address determined by non-volatile memory
  MTU is 1500 bytes
  Helper address is not set
  Directed broadcast forwarding is disabled
  Outgoing access list is not set
  Inbound  access list is 100

Proxy ARP is enabled
Local Proxy ARP is disabled
Security level is default
Split horizon is enabled
ICMP redirects are always sent
ICMP unreachables are always sent
ICMP mask replies are never sent
IP fast switching is enabled
IP fast switching on the same interface is disabled
IP Flow switching is disabled
IP CEF switching is enabled
IP CEF Feature Fast switching turbo vector
IP multicast fast switching is enabled
IP multicast distributed fast switching is disabled
IP route-cache flags are Fast, CEF
Router Discovery is disabled
IP output packet accounting is disabled
IP access violation accounting is disabled
TCP/IP header compression is disabled
RTP/IP header compression is disabled
Policy routing is disabled
Network address translation is enabled, interface in domain inside
BGP Policy Mapping is disabled
WCCP Redirect outbound is disabled
WCCP Redirect inbound is disabled
WCCP Redirect exclude is disabled
Inbound inspection rule is SDM_LOW

--------------------------------------------------------------------------------------------ACL 100-----------------------------

deny icmp any any echo-reply
deny ip host 255.255.255.255 any
deny ip 127.0.0.0 0.255.255.255 any
deny ip host 66.163.169.186 any
permit ip any any (122467027 matches)

---------------------------------------------------------------------------------------------------------------------------------------------------------------------

----------------------------------------------